Excalibur Class

Category: Explorer

Expected Duration: 200 years
Time Between Resupply: 1 years
Time Between Refit: 5 years

Personnel
Officers: 250
Enlisted Crew: 600
Marines: 288
Passengers: 200

Speed
Cruising Velocity: Warp 8
Maximum Velocity: Warp 9.9
Emergency Velocity: Warp 9.99 (for 36 hours)

Dimensions
Length: 860 metres
Width: 356 metres
Height: 170 metres
Decks: 40

Auxiliary Craft
Shuttlebays: 3
Fighters
Broadsword Multi-role Assault Fighter: 12
Valkyrie Space Superiority Fighter: 6
Runabouts
Danube Runabout: 2
Talon Scout: 2
Shuttles
Hunley Shuttle: 2
Type 11 Shuttle: 4
Type 9 Shuttle: 6
Transports
Argo Transport: 2
Wyvern Hopper Transport: 3

Armament
Defensive Systems
Ablative Armour
Phasers
Type XII Array: 14
Shielding Systems
Auto-Modulating Shields
Metaphasic Shielding
Regenerative Shielding
Torpedoes
Burst-Fire Torpedo Launcher: 6
Photon Torpedoes: 220
Quantum Torpedoes: 100
Rapid-Fire Quantum Torpedo Turret: 3
Quantum Torpedoes: 320
Tri-Cobalt Devices: 25



Description

During the 2360's and early 2370's Starfleet faced numerous threats that could pose a great risk to the Federations safety. Faced with threats such as the Borg and the dominion, it was decided that Starfleet should move away from the "bigger is better" philosophy of preceding decades and focus R & D and construction efforts onto ships with a specific purpose. Several classes of ship benefited from this shift in focus, including the Defiant, Sovereign, Anubis, Normandy, and the experimental Prometheus class starship. Unfortunately, one of the starship designs to be shelved was the Excalibur Class. Designed as a deep-space exploration vessel, the Excalibur design was rushed into production with the discovery of the Bajoran Wormhole. It was hoped the Excaliburs would spearhead the exploration of the Gamma Quadrant. The prototype vessel was in the final stages of construction when contact was made with the Dominion. ASDB decided to complete as much as they could on the protoype and suspended production of the Excalibur class, pending a successful contact with the Dominion. With the outbreak of full-scale war, the Excalibur project was suspended indefinitely and the prototype put into storage so resources could be dedicated to the war effort.
After the Dominion War, Starfleet began to look at the state of the fleet and identify possible ship classes to cover the shortcomings of the fleet. Although the Galaxy and Nebula classes were successful multi-purpose vessels and explorers in their own right, several of the ships completed during the war had been equipped solely for combat, and had to go into dry-dock for extensive repair/refit. During the war, advances in technology had been primarily focused on offensive and defensive systems for starships, and in C3 (Command, Control, Communications) technology to co-ordinate fleet actions. Neither ship could integrate these advances without sacrificing some of their versatility and excellent science facilities. Some parties proposed a C3 Pod for the Nebula, but the idea was ruled out on the grounds of the additional development time, pod manufacture, and the lead-time on refitting the pod onto the ship would entail. After much consideration, Starfleet decided to build a new class of vessel that could meet the requirements, and the Excalibur class was selected from the candidates as the base design.

The Excalibur provided an excellent reference design for the new ideas coming from Starfleet R&D. In an unconventional move, ASDB decided to reduce the length significantly from its original base specification of 1.53km to keep the manufacturing costs down. During the redesign phase, Starfleet engineers likened it to a 20th century Swiss Army Knife. The science facilities were good, but not as good as a Galaxy class, the ship could handle a wide-variety of missions, but it lacked the versatility of a Nebula class, and while the ship was to have impressive combat and diplomatic capabilities, they would not match those of the Sovereign class. The result was a ship that performed well in several key areas but excelled in none, yet was unique enough to stand on its own.

The first Excalibur deep-space prototype vessel was heavily influenced by the Sovereign class starship, featuring an elongated oval-like saucer section and a secondary hull that was tapered at the front to resemble an arrowhead. Upon production, many criticised the design saying it was not functional enough to serve in the role. When it was announced that the ship was to go into mass production in a different role, Starfleet requested that a new design team was formed. Staff who had worked on the Sovereign, Galaxy, Ambassador and even Excelsior-refit projects were assembled and given the brief to redesign the Excalibur. The end result was something that took a lot of design cues from other starships, whilst still retaining the style and some of the shaping of the original Excalibur.

The Excaliburs weapons and defensive systems were based on those of the Sovereign class. Type XII phasers were installed, as was regenerative shielding. The torpedo systems feature no less than three Quantum Burst Turrets, two of which were mounted onto the underside of the saucer, one on the port cutaway section and one on the starboard section. This gives the Excalibur class a projected forward firepower unparalleled by anything else in service apart from the Akira class. In a rather unconventional move, the 3rd turret was mounted onto the dorsal section of the starship, approximately two-thirds of the way along the central spine. These turrets are backed up by six conventional torpedo launchers, two of which are mounted on the fore, two on the aft of the secondary hull and one each on the fore and aft of the upper saucer sections. Key sections of the ship are covered with a 4.5cm ablative armour matrix.

The sensor systems of the Excalibur were closely based on those of the Galaxy and Nova class. To fulfil the role of tactical command, Starfleet Engineers decided to link the sensors and subspace comms systems directly to a Combat Information Centre. The CIC is a dedicated control room capable of receiving and compiling the sensor feeds from up to 80 starships. From the CIC, the CO or Strategic Ops staff can direct a fleet action or co-ordinate a major mission effort. For this reason, Excalibur class vessels are frequently found "hanging back" in fleet engagements, their CO's often the host to Admirals and other fleet staff who co-ordinate the engagement from the CIC. The Excalibur features an impressive range of science facilities, allowing it to handle a wide variety of scientific missions without the need for additional scientific support. The medical facilities are equally impressive, rivalling those of a small starbase hospital. In addition to these, the Excalibur also features several large chambers that can easily be refitted by the ships crew to serve a variety of purposes including triage facilities, scientific labs, and additional quarters.

The propulsion systems of the Excalibur class are some of the most advanced of the fleet. The warp systems of the Excalibur are essentially an uprated version of the Sovereign class starship's. Capable of a sustained 36-hour emergency cruise speed of warp 9.99 and a max cruise of warp 9.9, the Excalibur can be rapidly deployed within a short space of time. The sublight systems are essentially an uprated version of the Sovereign class, giving it superb manueverability for a vessel of its size.

In an unconventional move, it was decided to put a third shuttlebay directly on the ventral side of the secondary hull. Utilising a carry-and-drop system, the third bay has earned the title of the "drop bay" by the marine forces involved in the initial testing. It is anticipated that the drop bay will be mainly used to deploy the transports and runabouts carried by the Excalibur class. The Excalibur also features two shuttlebays mounted on the aft of the saucer section. The two bays are linked together to allow multiple launches and returns to occur.

The first Excalibur class vessel was launched in 2380 and assigned to Obsidian Fleet for evaluation. After a successful trial period under the command of Admiral du Lac, an order for 5 other Excalibur class vessels were placed by Obsidian Fleet Command, the first of which is expected to enter service in 2381.

Deck Listing:

Deck Description
1 Main Bridge, Captain's Ready Room, Executive Officer's Office, Briefing Room

2 Captain's Quarters, Senior Officer Quarters, Upper Torpedo turret

3 Officer Quarters, Holodecks, Springball and Volleyball courts, Observation Lounge, Main Briefing room

4 Officer Quarters, Crew Lounges, Ship's Library, Holodecks

5 Tactical Office, Primary Security Office, Crew Quarters, Science Labs, Combat Information Centre (CIC)

6 Stellar Cartography, Science Labs, Maintenance, Crew Quarters, Crew Lounges

7 Primary Sickbay, Science Labs, Living Quarters

8 Counseling Offices, Crew Quarters, Transporter Rooms, Conference Rooms

9 Conference Rooms, VIP/Guest Quarters, Junior Officers Quarters

10 Primary Computer Core, Operations Center, Maintenance, Crew Quarters

11 Crew Quarters, Marine Barracks, Torpedo storage, Main Torpedo Room,

12 Crew Quarters, Marine Barracks, Main Impulse Engines, Main Lounge Lvl 2

13 Main Lounge, Docking Clamps, Shuttlebays 1 & 2 (upper level)

14 Holodecks 4-6, Recreational Facilities, Gymnasium, Shuttlebays 1 & 2 (lower level)

15 Medical Laboratories, Docking port, Environmental Control and Life Support

16 Transporter Rooms 3 4 & 5, Science labs

17 Torpedo Bay 2 Control & Storage, Cargo Bays

18 Cargo Bays, Cargo Transporters 1-5, Matter storage pods

19 Crew Quarters, Living Quarters, Enlisted lounge

20 Crew Quarters, Recreation facilities, Living quarters

21 Maintenance, Cargo bays, Marine HQ, Marine training facilities

22 Upper core injection assembly, Primary Power Distrbitution Node and Controls, SIF Maintenance and Monitoring, Storage Lockers 1-3

23 Upper Engineering Support Area, IDF Maintenance and Monitoring, Storage Lockers 4-6

24 Main Engineering, Engineering Labs 1 & 2, Storage Lockers 7-9, Cargo Transporter 9

25 Main Engineering, Engineering Labs 3 & 4, Auxiliary Life Support, Secondary Power System Control Suite

26 Main Engineering, Quartermaster's Office, Chief Engineer's Office

27 Deuterium Storage, Deflector Control, Lower Level Torpedo Bay Control, Dorsal Docking Port

28 Deuterium Fill Ports and Storage, Engineering Support, Parts Storage, Secondary Computer Core

29 Antimatter Storage Pods , Environmental Control, Antimatter Injection Reactors, Viewing Lounges, Cargo Bays

30 Antimatter Storage Pods, Engineering Support Labs, Emergency Batteries, Secondary Antimatter & Deuterium storage

31 Transporter Rooms 6 and 7, Cargo Transporters 6-8, Life Support Systems

32 Security, Brig, Armory, Cargo bays, Waste Management

33 Cargo Bays, Industrial Replicators, Torpedo Bay 3 Control & Storage, Tractor Beam Control

34 Maintenance Access, Primary Sensor control

35 Torpedo storage, Rear Torpedo Room, parts storage, Cargo Bays

36 Engineering Support, Cargo Bays

37 Engineering Support, Cargo Bays

38 Engineering Support, Cargo Bays, Sensor Arrays

39 Observation decks, Auxilary Craft Maintenance, Drop bay (upper level)

40 Drop bay (lower level), Sensor Control, Tractor Control